Slab movement under equipment or vehicle loads
COMMERCIAL CONCRETE LEVELING
Commercial Void Filling and Slab Stabilization
Restore support below suitable slabs at facilities and paved areas, including occupied properties where voids are suspected.
WHAT TO LOOK FOR
Signs the slab deserves a closer look.
A void below commercial concrete may show up as rocking, hollow sound, recurring cracking, or settlement around a utility corridor. The scope must distinguish support loss from structural failure and define how much movement is acceptable during filling.
Visible washout at an edge or joint
A hollow response across part of a floor
Recurring settlement beside a trench, drain, or structure
WHY IT MOVES
Start below the surface.
Concrete usually settles because the support below it changed. North Texas moisture swings and drainage can both play a part. So can disturbed fill.
Water movement
Roof drainage, site runoff, process water, or leaks can move supporting fines from below concrete.
Trench settlement
Utility and drain backfill can consolidate long after the surface is restored.
Variable subgrade
Large slabs can cross several soil conditions and bridge areas with different support.
THE REPAIR PLAN
How we approach this surface.
Define the evidence
Plans, probing, visible edges, movement history, and site drainage help locate the suspected area.
Set movement tolerance
Stabilization and lifting use different goals and pressures, so the acceptable height change is documented.
Coordinate monitoring
The slab and nearby fixed elements are checked as material is placed in stages.
IS LIFTING A FIT?
Keep the concrete when the concrete is worth keeping.
An estimate should separate settlement from slab failure and explain the limits before work begins.
LIFTING MAY FIT
Look for sound, movable concrete.
- The slab is serviceable but has lost support
- The suspected area can be reached with an injection plan
- Movement tolerance and operating constraints are clear
CONSIDER ANOTHER REPAIR
Some conditions need replacement or more investigation.
- The slab or supporting soil is structurally inadequate
- The void involves an active sinkhole, major utility failure, or unknown hazard
- Engineering or excavation is needed to diagnose the condition
COMMON QUESTIONS
Questions about void filling & stabilization.
NORTH TEXAS SERVICE
Show us what the slab is doing.
Send the surface and city or ZIP code. Tell us what you are noticing. We'll start with fit and availability.
RELATED SERVICES
